Puma Hunter

This one piece recurve is designed to be a well rounded hunting bow.  It has a comfortable medium wrist grip (standard) with simple but flowing contours in the 20” riser.  The bow's design allows for a smooth draw to 30 inches. The sight window is 5” tall and cut 1/8” past center. The limbs are approximately 1 3/4” at the fadeouts and taper to about 5/8” at the tips.

Bow length is currently available in 60” with draw weights up to 70# offered.

The recommended brace height for the 60" Puma Hunter is 7 1/2” to 8”.

Bow length                                  60"

Recommended draw length    25" to 30"  

(These recommendations are offered only as guidelines.)

King Panther 

This recurve has the style and grace that some of the bows crafted in the 1960’s had. It was created for those who like a classic looking one piece bow.

It has a very comfortable medium wrist grip (standard).  The riser is 22” from fadeout to fadeout with a 5 1/2” sight window cut 1/8” past center. The limbs taper from approximately 1 3/4” at the fadeouts to 5/8” at the tips.

Bow length is currently available in 62” with draw weights up to 70# offered.

The recommended brace height for the King Panther is 7 1/2” to 8 1/4”.

Bow length                                62"

Recommended draw length  25" to 31"

(These recommendations are offered only as guidelines.)

Wildcat II T/D  (New Model!) 

This new take down recurve has replaced my original Wildcat T/D.  

The Wildcat II was developed from my own personal preference for the look and feel of a one piece recurve.  It has the lines and appeal of a true one piece bow with the convenience of a 3 piece take down. 

Primarily designed as a hunting bow, it has a very comfortable grip with a nicely radiused shelf and a 5" sight window cut 1/8" past center.

It is currently available in lengths of 60" or 64" with draw weights up to 70# offered. 

A 62" length should be available sometime in 2009. 

The recommended brace height is 7 1/4” to 8 1/4”(depending on bow length).

Bow length                                60"               64"

Recommended draw length  24" to 29"     26" to 32"

(These recommendations are offered only as guidelines.)     

Tomcat T/D        

The Tomcat T/D is becoming known as an exceptional bow for the money.  It is intended for those who desire a more affordably priced hunting bow but also want high quality craftsmanship combined with good performance.    

This bow has a 17 5/8" long riser with a 3 1/2" sight window (cut 1/8" past center) which allows the limbs to be interchange between right hand and left hand risers.  It is available in lengths of 60” or 62” with draw weights offered up to 70#.

The Tomcat is only available in grey or brown actionwood for the riser and either black or brown fiberglass limbs with a maple core (no exceptions regarding changes in material choices please).  Also, none of the other riser or limb options are available for this model.  It has no riser overlays but does feature fine quality limb tip overlays of multi-layered micarta or fiberglass. 

Please keep in mind that this model is intended as more of a "production bow" than a "custom bow" and it has somewhat limited options to choose from.  Many of the components for this bow are pre-made in batches which is part of what allows it to be sold at a lower cost when compared to my other models.  Because of this there will be no exceptions in material choices (exotic hardwoods, Bamboo limb core, clear fiberglass limbs, ect.).   

Recommended brace height is 7 1/4” to 8 1/4” (depending on bow length).

Bow length                                  60"             62"             

Recommended draw length   25" to 29"    26" to 30"     

(These recommendations are offered only as guidelines.)